SPECIFICATIONS
Main Unit:
Indoor Temperature range:
23.0°F to 122.0°F
Temperature Resolution:
0.2°F
User-selectable (F° or C°) temperature display
Indoor Humidity range:
20 to 95% RH
Humidity Resolution:
1%
Comfort Level Indicator:
Comfort, Wet, Dry
Maximum number of remote sensors:
3
Remote Sensor:
Remote Temperature range:
with alkaline batteries:
-4°F to 140°F
with lithium batteries:
-38.0°F to 140°F
Temperature Resolution:
0.2°F
Remote Humidity range:
20 to 95% RH
Humidity Resolution:
1%
RF Transmission Frequency:
433 MHz
RF Transmission range:
Max. 100'
Temperature transmission cycle:
approx. 45 seconds
Power:
Main unit:
2x AA (1.5V) batteries (not inc.)
Remote Sensor:
2x AA (1.5V) batteries (not inc.)
Dimensions:
Main unit:
4.32"W x 4.75"H x 1"D
Remote sensor:
2.25"W x 4.125"H x 1.125"D
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) This device must accept any interference received, including interference
that may cause undesired operation.
WARNING: Changes or modifi cation to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment had been tested and found to comply with the limits
for a Class B Digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment, installed and used in accordance with the
instructions, may cause harmful interference to radio communications. There is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged
to improve or correct turning the interference by one or more of the following
measures:
1. Reorient or relocate the receiving antenna
2. Increase the separation between the equipment and receiver.
3. Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
DECLARATION OF CONFORMITY
We, Hideki Electronics, Inc., 7865 SW Mohawk, Tualatin, OR 97062,
(503) 612-8395, declare that the product:
Product No.: TM005
Manufactured by Hideki Electronics Ltd., Unit 2304-06, 23/F Riley House, 88 Lei
Muk Road, Kwai Chung, New Territories, Hong Kong,
is in conformity with Part 15 of the FCC Rules. Operation is subject to the follow-
ing two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that
may cause undesired operation.
STANDARD WARRANTY INFORMATION
This product is warranted from manufacturing defects for 90 days from date of
retail purchase. It does not cover damages or wear resulting from accident, mis-
use, abuse, commercial use, or unauthorized adjustment and repair.
Should you require assistance with this product and its operation, please contact
Wind & Weather Customer Service at 877-255-3700.
14
15
