16
17
YEAR, DATE, TIME, and TEMPERATURE UNIT
1. Press and hold
MODE
for 3 seconds: the year will fl ash.
2. Press “ + ” or “ - ” to change the fl ashing digits.
3. After the fi rst value is set, press
MODE
again. Continue
setting month, day, hour, minute, display language, and
Fahrenheit or Celsius display.
4. When you’ve set the last value, press
MODE
for the last
time to return to regular mode.
ALARMS
• Weekday (M–F) Alarm
The alarm will sound and the alarm icon will fl ash at the
set time Mondays through Fridays.
• Single Day Alarm
The alarm will sound and the alarm icon will fl ash at the
set time, but will not activate on subsequent days.
• Pre-Alarm
If the remote temperature is 32°F/0°C or below, the
pre-alarm feature will be activated. The pre-alarm time
interval can be set for 15, 30, 45, 60, 75, or 90 minutes
before the weekday or single alarm time. Press and hold
[
ALARM ON/OFF
] for 2 seconds in Pre-Alarm mode to
set the pre-alarm interval.
“
” (Weekday alarm), “
” (Single day alarm), and
“Pre-AL” (Pre-alarm) icons will indicate which alarm
mode is armed. You can enable or disable an alarm by
pressing the [ + ],[ – ] buttons in alarm display mode.
Press
MODE
to toggle between alarm modes or to return
to the default display.
SETTING THE ALARMS
To set any alarm:
1. Press [
ALARM ON/OFF
] once to display a specifi c
alarm time. If the selected alarm is off, “OFF” will be
displayed.
2. Press and hold [
ALARM ON/OFF
] for 2 seconds. The
hour digit will fl ash.
3. Enter the hour using [ - ] or [ + ] buttons.
4. Press [
ALARM ON/OFF
] again. The minute digits will
fl ash.
5. Enter the minutes using [ - ] or [ + ] buttons.
6. Press [
ALARM ON/OFF
] again to exit from the alarm
time mode.
7. Repeat the same procedure to set any of the alarms
(weekly, daily, or pre-alarm).
SNOOZE
When the alarm sounds, press the
LIGHT/ SNOOZE
but-
ton to temporarily stop the alarm. After depressing, the
alarm sound will resume in 5 minutes. If the alarm is not
disabled after that, it will sound for 4 more minutes and
then will stop by itself.
HOW TO STOP AN ALARM
• Press [
ALARM ON/OFF
] on the main unit to disable
any alarm
• To deactivate an alarm, select the alarm and press [ – ]
• To reactivate an alarm, select the alarm and press [ + ]
