TOUCH CONTROLS & FEATURES
1.
Blower On/Off
By pressing , the blower is switched On and Off. When switched On, the blower starts up on speed level 2.
2.
Speed Selection
The 3 speed levels are selected by pressing to decrease and to increase speed level. The display indicates
level selected.
3.
Delay Off
This is used for programmed shut down of blower and lights 15 minutes after the function is activated.
Press once, a dot flashes in the lower right hand side of display indicating the function is on.
The hood will completely shut down in 15 minutes.
4.
Lights On/Off
Switch lights On and Off by pressing key once.
5.
Advance Display Functions
Filters Clean Reminder (Metal):
After every 30 hours of use, the display will star flashing an reminding you to clean the metal filters from residue
and possible clogs.
The standard Metal Filters fitted are required to be cleaned frequently and as recommended in order to maintain
blower efficiency. If improperly maintained, residue from cooking will sift through filters and cause damage to hood
blowers and other sensitive components; and possibly clog duct work creates fire hazard.
Filters Change Reminder (Carbon, if fittted):
When your hood is installed as a 'Purifying' (Ductless Recirculating) unit, it is fitted with a set of Carbon Filters to
purify exhaust and fumes from cooking, and re-circulates the air witihin the home. Theese Carbon Filters are
required to be replaced after every 120 hours of use. The
Filter Change Reminder
function in the microprocessor
needs to be switched on. The microprocessor in the controls when set, will elapsed and count usage time and
indicate when carbon filter replacement is needed every 120 hrs.
Description of the Hood & Controls
1
5
2
3
4
Blower On/Off
Display (
Speed level, Delay Off Indicator, Filter Clean/Change)
Adjust 3 Speed Levels
15 Min Delay Off
Lights On/Off
14
Summary of Contents for PFA36SCG
Page 1: ...OCT06 0101 PFA42SCG PFA36SCG www windcrestcnp com By CNP INDUSTRIES INC ...
Page 2: ......
Page 59: ......
Page 60: ......
