WINDGOO Technology FST10, English Manual

2.2 Function introduction

1. Switch on / off: long press the power button to turn on / off the power.

2. Acceleration: Press the accelerator button on the right hand to start and accelerate.

3. Brake: press the brake handle on the left handlebar to brake.

4. Up and down gear: when the machine does not accelerate after starting up, gently press the XX button to cycle 

up and down gear.

5. Headlights on /off: Turn on and off the headlights by pressing the button above the headlight when the machine 

is turned on without acceleration.

6. Cruising at constant speed: (cruise can be increased according to customer's requirements) Turn the throttle to a 

certain position and hold for 6-8 seconds to enter the cruise mode at constant speed. At this time, release the 

throttle and the scooter will automatically drive at a constant speed. Press the throttle or brake lightly, and the 

cruise control will be canceled.

7. Warning: the instrument has been set. Please do not change the parameters arbitrarily. If the parameters are 

changed privately, there will be no warranty.

Current speed

Brake handle

Display instrument

P

ower button

Accelerator handle

G

ear position

Power

U

pshift key

Speed unit

P

ower button

T

otal mileage

D

ownshift button

Grip

07