Windowmate WM1000-CT Series, Manual

1

2

3

4

5

10

▶II Button

- Press this button to start the cleaning cycle. 
- To pause your robot during a cleaing cycle, press this button again. To resume the cleaning cycle, 
  press this button once again.

* Make sure that the robot is placed at least 20cm away from the window frame when you start the cleaning cycle. 
  Otherwise the robot may not work properly because of frame interference.

Stop Button

- Press this button to stop Windowmate during a cleaning cycle.
- If you press ▶II button to start the cleaning cycle, It will start again from the original cleaning position 

Direction Buttons

- Press this button to move Windowmate manually.
- The robot will stop moving when it faces an obstacle in a manual mode 

* Make sure that the robot is placed at least 20cm away from the window frame when you operate the robot manually. 

Home Button

- When you press this button in an automatic mode, the robot will move back to the original cleaning position. 
- This function will not work when you move the Windowmate manually. 
  This function will work in an automatic mode.

Edge Mode

- Press this button to clean the corners of the windows again when the cleaning is done in an auto mode   

* Make sure that the robot is placed at least 20cm away from the window frame when you operate the robot. 
Otherwise the robot may not work properly or may drop off the windows. 

1

2

3

4

5

Product Name