06
When the robot is in operation
After each use
·
Do not attempt to touch or remove the Windowmate
while it is operating.
·
If the robot does not work out of your reach, do not attempt
to remove the Windowmate from Windows by force.
·
Your robot is for cleaning the windows only.
·
Use only mop provided with Windowmate.
·
Do not apply excessive force or pressure to the
bumper since the sensors are sensitive.
·
Do not operate the robot in areas with exposed
electrical outlets in the room.
·
It is recommended to operate and store the robot
in room temperature environments.
·
Do not presoak cleaning pads before attaching them
to the robot. Pads should be dry before spraying the
cleaning solutions on them.
·
Do not directly apply water to, or wipe the robot with
volatile agents such as benzene, paint thinner, or alcohol.
·
Do not attempt to disassemble the robot.
·
Check for foreign substances and remove them using
a clean cloth before and after each use.
·
The robot has the built-in strong magnetics.
So, do not place credit cards or cell phones that are
vulnerable to magnet on the units.
·
Use only rechargable battery packs or recharger with
the correct specification approved by RF CO., LTD.
- Call the service center and follow the
instructions.
- If the bumper sensor is damaged, the
robot may not recognize the obstacles.
- Critical damage to the product
may occur.
- Tampering with these functions may
create a hazardous condition, and it will
void your warranty.
- The robot may be slippery on the
windows.
- Such objects may be damaged and
may not be used.
Safety Instructions
Summary of Contents for WM1000-CT Series
Page 3: ......
Page 8: ...Product Description...
