Page 5
For technical questions, please call 1-888-866-5797.
Item 62603
SAFET
y
Op
ERA
TION
M
AINTENAN
c
E
SETU
p
Setup - Before Use:
Read the ENTIRE IMpORTANT SAFETy INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Note:
For additional information regarding the parts listed in the following
pages, refer to
Parts List and Diagram
on page 10.
Note:
More than one person is needed for proper assembly.
1. Insert Connecting Nuts (K) into holes at ends of
a Cross Brace (F). Make sure that the slot on
the Nuts align horizontally with the Connecting
Bolts (K). This will allow the Bolts to be threaded
into the Cross Brace. See Figure 1, below.
connecting
Nuts (K)
Leg
(A-L, A-R)
cross Brace (F)
Figure 1
2. Set the Cross Brace against a Leg (A-L) and use
the Hex Key (M) and Bolt (K) to fasten the Cross
Brace and Leg together. See Figure 2, below.
cross
Brace (F)
Leg
(A-L, A-R)
Hex
Key (M)
Figure 2
NOTE:
Make sure the groove in the
Cross Brace is facing IN.
3. Repeat Step 2 for the second Leg (A-R).
4. Once both Legs have been fastened to the
Cross Brace, slide the Shelf (G) between the
Legs so that the far edge fits onto the groove
on the Cross Brace. See Figure 3, below.
cross
Brace (F)
Leg
(A-L, A-R)
Shelf (G)
Figure 3
5. While your assistant holds the Shelf in place
against the first Cross Brace, attach the Middle
Brace (H) to the underside of the shelf. Fasten
in place with screws (N). See Figure 4, below.
Middle Brace (H)
Figure 4
