Windsor Design 62603, Owner'S Manual & Safety Instructions

Page 8

For technical questions, please call 1-888-866-5797.

Item 62603 

SAFET

y

Op
ERA
TION

M

AINTENAN

c

E

SETU
p

17. Use the Drawer Bolts (L) to fasten the 

Drawer Handles (U) to the Drawer Front 

Panels (Q). See Figure 13, below.

Drawer 

Handle (U) 

Drawer Front  

panel (Q) 

Figure 13

Note:

 Each Drawer piece should have a 

sticker designating what it is.  Use the Parts 

List as on page 10 as reference.  This 

will help assure correct assembly.

18. Fasten the Drawer Panel (Q) and the Drawer Slot  

Panel (S-L, S-R) to the Drawer Front 

Panel.  See Figure 14, below.

Drawer Front 

panel (Q) 

Drawer Slot  

panel (S-L, S-R) 

Screwdriver

Figure 14

19. Slide the Drawer Bottom (T) into the grooves along 

the insides of the side panels, making sure the felt 

side is up, then fasten the Drawer Back Panel to the 

ends of the two side Panels.  See Figure 15, below.

Drawer Bottom  

(T) 

Drawer Slot  

panel (S-R) 

Drawer Back  

panel (R) 

Figure 15

20. Fasten Drawer Bottom to Drawer Pack Panel.  

Once Drawers are fully assembled, verify 

that the inside tracks along the Partition are 

pushed forward.  See Figure 16, below.

Figure 16