SKU 93031
For technical questions, please call 1-800-444-3353.
Page 4
Figure 1
Mounting:
1.
Choose an area you wish to mount the clock. Make sure you have located a
solid surface or use a molly bolt to prevent mounting from pulling out of the
dry wall.
2.
Drill a small hole and screw in a 3/16” wood screw into the hole leaving
about 1/2 “ of the screw exposed. Use the Mounting Hole (2) to hang the
clock onto the screw.
See Figure 1.
Mounting
Hole (2)
Battery
Compartment
Battery
Cover (6)
Dial to Set
Time (3)
Alarm
Time Knob
(4)
Alarm
Bells (1)
Battery
Compartment
Alarm
On/Off
Switch (5)
Placing Batteries:
1.
Remove the Battery Cover (6).
See Figure 1.
2.
Place two “C” batteries into the Battery Compartments. When positioning
batteries, note the polarity markings in the Battery Compartments. Position
accordingly. Replace the Battery Cover (6).
See Figure 1.
