SKU 93031
For technical questions, please call 1-800-444-3353.
Page 5
Setting the Clock and Alarm:
1.
After determining the correct time, turn the “Dial to Set the Time” (3)
clockwise (back of the clock) until the clock shows the correct time.
See
Figure 1 on page 4.
2.
To set the alarm, turn the “Alarm Time Knob (4) clockwise to your desired
wake-up time. Make sure the “Alarm Hand” (9) is pointing to the correct
wake-up time on the face of the clock.
See Figure 2.
The Alarm Bells (1) will
chime at that time only when the ON/OFF Switch (5) is set ON.
Example:
You want to wake-up at 5:00 AM. You set the Alarm Hand (9) to the
number 5 on the face of the clock.
After
5:00 PM (the night before) you turn
the ON/OFF Switch (5) to the ON position.
Note
: There is no AM / PM alarm
setting. The Alarm Hammer (7) will strike the Alarm Bells (1) at 5:00 AM the
next day. To shut off the alarm, turn the ON/OFF Switch (5) to OFF.
See
Figure 1 on page 4.
Figure 2
Hours (10)
Minute Hand
(12)
Second
Hand (11)
Hour Hand (8)
Alarm
Bells (1)
Alarm Hammer
(7)
Feet for
Table Top
(13)
Alarm Hand (9)
Alarm
Bells (1)
A stoppage or slow down of the minute and/or second hand will indicate that the
batteries need replacement.
See directions on page 4.
Clock Operation
