SKU 93225
For technical questions please call 1-800-444-3353.
Page 2
T
HANK YOU for choosing a
HARBOR FREIGHT TOOLS product. For future reference, please
complete the owner’s record below:
Model______________
Serial No._____________ Purchase Date_______________
SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the
entire manual to become familiar with the unit BEFORE you begin assembly.
Technical Specifications
Materials:
Cast steel, metal, aluminum and iron
Overall Height:
86”
Clock Face:
11-3/4” diameter
Clock Face Housing Assy.: 15” Diameter x 6” W x 23” H
Clock Numbers:
Roman numerals
Base Dimensions:
13-1/2” Diameter x 2-1/2” H
Batteries:
(2) “AA” cell batteries (not included)
Weight:
42.2 lb.
Safety Warnings and Precautions
WARNING: When using product, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this product!
1.
Keep work area clean. Cluttered areas invite injuries.
2.
Observe work area conditions. Keep work area well lighted.
3.
Use the right product for the job. There are certain applications for which the Lamppost
Clock was designed. Do not modify the Clock and do not use the Clock for a purpose for
which it was not intended.
4.
Check for damaged parts. Before using any product, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform its
intended function. Check for any broken or damaged parts and any other conditions that may
affect its operation. Replace or repair damaged or worn parts immediately.
5.
Replacement parts and accessories. When servicing, use only identical replacement
parts. Use of any other parts will void the warranty.
6.
Do not set up this product if under the influence of alcohol or drugs. Read warning
labels on prescriptions to determine if your judgment or reflexes are impaired while taking
drugs. If there is any doubt, do not operate the product.
7.
Do not allow children to play with or hang on the Lamppost Clock. Because of its
intricate parts, the Clock can be damaged by improper use.
8.
Because of the weight of the Lamppost Clock, it is recommended that assembly be
done by two adults and that all lifting and moving of the Clock be done by two people.
Warning:
The warnings, cautions, and instructions discussed in this instruction manual cannot
cover all possible conditions and situations that may occur. It must be understood by
the operator that common sense and caution are factors which cannot be built into
this product, but must be supplied by the operator.
