24
Operations
The Burnish components of the machine are:
•
Burnish pad holder
•
Burnish pad
•
Burnish motor
•
Dust Collection Bag
As the machine moves forward, the burnish pad shines
the floor. Any excess dirt or wax gets picked up by the
pad and distributed into the dust collection bag via the
dust collection system.
Pre-Operation Checklist
•
Check that the Burnish Switch is in the off
position.
•
Check the pad holder to ensure there are no
breaks or cracks.
•
Check correct connection of the batteries.
•
Check that the Dust Collection Bag is empty.
•
Release caster breaks.
Turning on the Machine
1. Complete pre-operation check.
2. Turn the Key to the ON position.
3. Turn on the burnish switch and engage the handle
levers.
4. Adjust speed as needed with traction speed control
knob.
Changing Direction
When the handle levers are engaged the machine will
travel in the forward direction. To travel in reverse, while
the handle levers are engaged, hold down the reverse
switch. The machine will change from forward direction
to reverse direction. The machine will continue in the
reverse direction until the reverse switch is released.
Stopping and Turning Off Machine
To stop the machine, release the handle levers and the
machine will smoothly break to a stop and after 3
seconds the burnish motor will stop. When turning the
machine off, turn off the burnish switch and then turn off
the key switch.
Installing/Changing Burnishing Pad
1. Make sure the Burnish Switch is OFF.
2. Lift on the front of the deck and tilt deck into the
pad change position.
3. Remove the center device by turning counter
clockwise and carefully remove the old pad from
the Velcro material.
Carefully inspect the pad holder for cracks or damage!
replace if necessary.
Inspectez soigneusement le support de patin à la
recherche de fissures ou de dommages. Remplacez-le
au besoin.
4. Pull center from new pad, align pad on pad holder
and secure with centering device by turning clock-
wise.
86408910 Lightning BDP 50-2000 W
Summary of Contents for 10020430
