49
Maintenance
Electric Parking Brake Engagement
FOR SAFETY: Before leaving or servicing machine,
stop on a level surface, turn off machine and
remove key.
Electric Brake Engagement
This machine is equipped with an electric parking
brake.
The brake automatically engages and keeps the
machine from moving whenever the operator steps off
the platform or when emergency stop is engaged.
The brake has a mechanical over-ride that can be
engaged so machine can be pushed or towed (slowly).
To disengage brake:
1.
Pull lever away from brake housing.
2.
Insert material to hold brake lever in place.
Do not operate machine with brake disengaged.
N'actionnez pas la machine avec le frein désen-
gagé.
Drive Motor Carbon Brush Replacement
Do not use a pressure washer to clean around the
motors. Use tap pressure only.
N’utilisez pas de nettoyeur haute pression pour
nettoyer autour des moteurs des brosses. Utilisez
seulement la pression du robinet.
FOR SAFETY: Before leaving or servicing machine,
stop on a level surface, turn off machine and
remove key.
1.
Disconnect batteries from machine.
2.
Remove brush caps from motor housing.
3.
Replace brushes.
4.
Install brush caps to motor housing.
86367610 Chariot CS26
