background image

SABER (SC)   86038350   01/29/07 

2-1 

IMPORTANT SAFETY INSTRUCTIONS 

When using an battery powered appliance, basic precaution 

must always be followed, including the following: 

READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE. 

 

 

 

 

 

To reduce the risk of fire, electric shock, or injury: 

 

Use only

 indoors. Do not use outdoors or expose to rain. 

Use only

 as described in this manual. Use only manufacturer’s recommended components and 

attachments. 

If the machine is 

not working properly

, has been dropped, damaged, left outdoors, or dropped into 

water, return it to an authorized service center. 

Do not

 operate the machine with any openings blocked. Keep openings free of debris that may reduce 

airflow. 

This machine 

is not

 suitable for picking up hazardous dust. 

Machine can cause a fire

 when operating near flammable vapors or materials. Do not operate this 

machine near flammable fluids, dust or vapors. 

This machine is suitable for commercial use, for example in hotels, schools, hospitals, 
factories, shops and offices for more than normal housekeeping purposes. 

Maintenance and repairs 

must be done

 by qualified personnel. 

If foam or liquid comes out of machine, 

switch off immediately

Disconnect

 battery before cleaning or servicing. 

Before the machine is discarded, the batteries 

must be removed

 and properly disposed of. 

Make sure all warning and caution labels 

are legible and properly attached

 to the machine.

 

During operation

, attention shall be paid to other persons, especially children. 

Before use

 all covers and doors shall be put in the positions specified in the instructions. 

When leaving unattended

, secure against unintentional movement. 

The machine shall only

 be operated by instructed and authorized persons. 

When leaving unattended

, switch off or lock the main power switch to prevent unauthorized use. 

Only chemicals recommended

 by the manufacturer shall be used. 

This appliance has been designed

 for use with the brushes specified by the manufacturer.  The fitting 

of other brushes may affect its safety. 

Do not

 use on surfaces having a gradient exceeding 2%. 

 

 

SAVE THESE INSTRUCTIONS 

WARNING: 

Summary of Contents for Saber Compact 10052190






























Reviews: