TRIDENT COMPACT 17"
Page
of 27
MAINTENANCE
SQUEEGEE
ASSEMBLY
Before and during use of machine, use a damp cloth to
wipe the outside and inside of squeegee to remove
buildup of foreign material on the squeegee blades.
This prevents streaking and residue
on the floor.
Squeegee
wear:
After extended use, the squeegee blades will wear. To
improve squeegee performance and extend wear, pro-
ceed as follows:
Turn off all switches and place the machine
on
a level surface. Raise the squeegee to
the transport position.
Loosen knobs on the
left
and right hand
sides of squeegee until squeegee can be
removed from the squeegee bracket.
Loosen the fasteners on front of squeegee
to replace or adjust front blade.
Unlatch rear squeegee latch to replace rear
blade.
2.
3.
4.
Adjusting Squeegee Assembly
1.
2.
Lower the squeegee and move the machine
forward.
the level
of the squeegee for an
even curl along the length of the blade. Use
camber adjustment knob to achieve even curl if
required.
Adjust the down pressure nut located
on
squeegee mounting assembly. Do not apply
excessive force.
3.
SQUEEGEE DEFLECTION
INCORRECT
NOTENOUGH
I