3 8
O F F ICE SU IT E U C
®
—A DMIN IS T R ATO R US ER GU IDE
Safety and Regulation Information
This device complies with Part 15 of the FCC Rules . Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any
interferences received, including interference that may cause undesired operation .
NOTE:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules . These limits are designed to provide
reasonable protection against harmful interference in a residential installation . This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications . However, there is no guarantee that interference will not occur in a
particular installation . If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
+ Reorient or relocate the receiving antenna .
+ Increase the separation between the equipment and receiver .
+ Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected .
+ Consult the dealer or an experienced radio/TV technician for help .
Hereby, Polycom, Inc . declares that the products in this manual are CE marked and in
compliance with all EU directives and regulations that apply to them including: R&TTE
Directive 1999/5/EC . A full copy of the
Declaration of Conformity can be obtained from Polycom Ltd ., 270 Bath Road, Slough,
Berkshire, SL1 4DX, UK .
In accordance with Part 15 of the FCC Rules, the user is cautioned that any changes or
modifications not expressly approved by Polycom, Inc . could void the user’s authority to
operate the equipment .
Operating Ambient Conditions:
+ Operating temperature: +32 to 104°F (0 to 40°C)
+ Relative humidity: 5% to 95%, non-condensing
+ Storage temperature: -40 to +160°F (-40 to +70°C)
Installation must be performed in accordance with all relevant national wiring rules.
L’Installation doit être exécutée conformément à tous les règlements nationaux
applicable au filage électrique.
The outlet to which this apparatus is connected must be installed near the equipment
and must always be readily accessible. La prise électrique à laquelle l’appareil est branché
doit être installée près de l’équipement et doit toujours être facilement accessible.
This Class [B] digital apparatus complies with Canadian ICES-003. Cet appareil
numérique de la classe [B] sera conforme à la norme NMB-003 du Canada.
To avoid electric shock, do not connect safety extra low voltage (SELV) circuits to
teleconference station network (TNV) circuits. LAN ports contain SELV circuit, and WAN
ports contain TNV circuits. Some LAN and WAN ports both use RJ-45 connectors. Use
caution when connecting cables. This product is rated 48Vdc, 0.25A. When used with the
optional external power supply (PSA15A-480PV, or similar rated PSU), the power supply
shall be a Listed power supply with a LPS output, rated 48V, min. 0.25A.
Hearing Aid Compatibility (HAC):
This device is hearing aid compatible.
RoHS: All Polycom phones comply with the requirements of the EU RoHS Directive.
Statements of compliance can be obtained from TypeApproval@polycom.com
Australia:
Warning—This equipment will be inoperable when mains power fails.
