WINDTECH KALi 23, Manual

7

Dacron

310-

180 

gr. Line attachment points are made of polyester.  

-- lines

The lines are made of Superaramid kevlar covered with a polyester sheath for protection
against wear, UV and abrasion.  The riser karabiners, also called "Maillons Rapide", are
made with stainless steel of. Risers are made of pre-stretched polyester.

> certification

The 

K A L I

is a paraglider of a intermediate level that has passed the tests of the DHV

level 1-2 with great success. This glider has successfully passed the DHV shock test with
a weight equal to the maximum total (all up) take-off weight. This means that the
paraglider is certified to resist to a load of 8 (eight) times the gravitational acceleration
(8 G´s). 

As regards the weight range of the glider, ALWAYS be certain that you are within the
correct weight range of the glider. To fly under-weight or over-weight can adversely
affect the stability of the 

K A L I  

&

flown as such it will no longer be certified.

> best glide 

&

the speed system

Best glide in nil wind, and still air, is
obtained at “trim” speed- that is brakes
fully released and no accelerator (speed
bar) applied. It is always best to fly with a
light pressure on the brakes, keeping a
“feel” on the wing in case of unexpected
turbulence.

When flying into (against the) wind a bet-
ter glide can be obtained by using the
speed system. The following is rough guide
line as to how much to apply.

-With around 10 km/h (6,2 Mph) of head
wind, best glide is obtained with 25%
accelerator applied.-With around 10 km/h
of head wind, best glide is obtained with
25% accelerator.

-With around 15-25 km/h of head wind,
best glide is obtained with 50

%

accelerator.

-With 25 km/h of head wind, best
glide is obtained with 75-100

%

accelerator. 

When flying downwind (wind from behind)