P30LF User Manual
Revision 1.0
Page 14 of 16
windy
nation
01/10/2018
No Display on LCD
1. Check the battery voltage on the battery terminals of controller to ensure at
least 9VDC is present
2. Reset controller by removing battery power for ~1 minute and reconnecting
The ‘LOAD ON’ indicator
is on but there is no power
output.
1. Load open circuit.
2. Check cables and connections and any other load switches.
3. Over discharge of the battery. The controller will resume normal operation
after the battery has finished charging.
5.3 S
UPPORT
If you are experiencing technical problems, and cannot find a solution in this manual, you can contact Windy
Nation Inc. for further assistance.
•
Call: (805) 323-6445
•
Email:
support@windynation.com
•
Write: 1404 Fleet Ave, Ventura, CA 93003
For challenging issues or to just ask a question, consider using our FREE Community Forums! Consult our
community of DIY'ers for fast answers to all your questions.
Post on our Forums:
http://www.windynation.com/community/
5.4 W
ARRANTY
Windy Nation warrants that the Power Controller
(the “Product”), will be free from manufacturing defects in
materials and workmanship under normal authorized use consistent with product instructions for a period of
one (1) year from the date the original purchaser
(“Customer”) receives the Product (the “Warranty Period”).
This warranty extends only to the original purchaser. The C
ustomer’s sole and exclusive remedy and the
entire liability of Windy Nation, its suppliers and affiliates for breach of the warranty is, at Windy Nation’s
option, either (i) to replace the Product (or defective component part(s)) with a new or reconditioned Product
(or component part(s)); (ii) to repair the reported problem; or (iii) to refund the purchase price of the Product.
Repaired or replaced products are warranted for the remainder of the original warranty period only. No
employee, agent, dealer or other person is authorized to give any warranties on behalf of Windy Nation not
expressly set forth in this limited warranty.
5.4.1
Restrictions
No warranty will apply if the Product (i) has been altered or modified except by Windy Nation; (ii) has not
been installed, operated, repaired, or maintained in accordance with instructions supplied by Windy Nation;
(iii) has been subjected to abnormal physical, thermal or electrical stress, misuse, negligence, or accident. If
Windy Nation determines that the problem with the Product is not due to a manufacturing defect in Windy
Nation’s workmanship or materials, or otherwise does not qualify for warranty repair, then the Customer will
be responsible for the costs of all necessary repairs and expenses incurred by Windy Nation.
5.4.2
Warranty Claims & Return Procedures
To be eligible for service under this warranty, the Customer must submit a service request within the
Warranty Period by contacting Windy Nation in writing or via telephone and obtaining a Returned Materials
Authorization (“RMA”) number. This RMA must be obtained before returning any product under this warranty.
Notification must include a description of the alleged defect, the manner in which the Product was used, the
serial number (if applicable), and the original purchase date in addition to the name, address, and telephone
number of the Customer. Within five (5) business days of the date of notification, Windy Nation will provide
the Customer with an RMA number and the location to which the Customer must return the defective
Product. Any Product returned for warranty service shall be shipped at the expense and risk of the
Customer. The Customer must return the entire Product kit (or, if authorized by Windy Nation, the defective
component parts), within fifteen (15) days after issuance of the RMA number. Windy Nation will be under no
obligation to accept any returned Product that does not have a valid RMA number. C
ustomer’s failure to
return the Product within fifteen (15) days of its receipt of an RMA number may result in cancellation of the
