Wine Cell'R BORDEAUX WC-09, User Manual

5

5.  Wine sHelF removal and installation

1.  remove any bottles stored on the racks. 
2.  Pull out the racks and press the black tongues on each side. (see figure 1) 

to put back the shelves in place
Push the racks into the sliders all the way to the back of the wine cellar. if inserted 
correctly, the tongues will prevent the shelves from being pulled out completely by 
accident. (see figure 2) 

NOTE:

 We recommend 

NOT

 removing the shelf with the control panel.

6.  instruCtions For a CorreCt and eFFeCtive use

•  the wine cellar requires a power supply of 115v aC and 60Hz. make certain that 

you connect the wine cellar to a proper voltage supply. 

•  You can adjust the temperature of your wine. Your red wines are stored on the 

upper four shelves of the cabinet. White wines are stored on the lower three shelves 
of the cabinet. the temperature variation between both lower and top section of the 
wine cellar is about 4.4°C to 5°C.  

•  to increase the overall temperature of the wine cellar, press the (+) button on the 

control panel. to decrease the overall temperature of the wine cellar, press the (-) 
button on the control panel. 

•  to view the wines inside the wine cellar, press on the on/oFF lamp button on the 

control panel. 

09m5_Manuel refroidisseurs vin BORDEAU_WC-09.indd   5

24/11/09   11:39 AM