18
TROUBLESHOOTING
Many common problems can be solved very easily. Follow the troubleshooting tips below
if you encounter any problem.
No.
PROBLEM
CAUSES & SOLUTIONS
Check if it is plugged in.
The cellar is not turned ON.
The circuit is closed or a fuse is blown.
It should be the only device plugged into the outlet. It is
recommended to provide a 15 amp circuit dedicated
exclusively to the cellar.
Check the temperature parameters on the control.
The outdoor environment requires cooler temperature
settings on the control.
The door is often open.
The door is not completely closed.
The door seal does not close well.
3
The temperature of my cellar
often varies from 3-4 degrees.
Is this normal?
This is normal: slight differences in temperature are necessary
for the proper functioning of the cellar. When the cellar begins
a defrost cycle, the temperature rises a little. When the
refrigeration system turns on again, the temperature cools
down.
These changes are taking place over short periods and their
influences are too small to affect the conservation of the
wine. The liquid tends to maintain an average temperature.
Is your cellar filled to at least 50% of its capacity? Has your
cellar been running for more than 48 hours?
Your cellar is installed near a heat source (heater, door,
window, stove, etc.).
The door is not completely closed.
The door seal does not close well.
The room temperature is warmer than normal.
A lot of content has been added to the cellar.
The door is opened too often.
The temperature is not well adjusted.
1
My cellar is not working.
2
My cellar is not cooling enough.
4
My cellar does not maintain its
temperature and the
compressor often starts.
5
My cellar automatically closes
ON / OFF frequently.
