9
Anti
-Tip Bracket Installation
If freestanding and/or to reduce the risk of tipping the unit by abnormal usage or
improper loading, it is recommended to secure by properly installing the anti-tip
device included.
Step 1
•
An anti-tip bracket can be installed on either one or both sides
•
If using both, keep the two bracket distance at 565 mm as in Picture 2
•
To install, place the bracket on the floor as shown in Picture 1
•
Mark the location of the four holes of the bracket on the floor
•
Use a 5/16 drill bit and insert plastic anchors
•
Secure bracket to floor using screws
Picture 1
Picture 2
Summary of Contents for 236 02 80 02
Page 4: ...4...
