21
Priming the Drain Trap
The internal drain trap primes itself automatically once the unit has run for a period of time and after the
system cycles off. This is confirmed by water dripping from the drain.
Wiring the System for Power
WARNING
ELECTRICAL SHOCK HAZARD
The electrical outlet and wiring installation must meet the national and local building codes.
DO:
√
Match the electrical outlet to the plug provided on the Wine Guardian.
√
Provide dedicated circuit and wiring for the system.
√
Match the wiring and breaker size to the rated load as shown on the serial plate and in
this guide. See Sample Serial Plate illustration below.
DO NOT:
√
DO NOT MODIFY THE PLUGS IN ANY WAY!
√
Do not use extension cords.
IMPORTANT
The electrical power supply must be 115 volt AC 1 phase 60 cycle, depending on the
model of the system, and cannot vary more than +/- 4% or damage may occur to the
system.
Plug the system into the wall outlet. Gently pull on the plug to make sure it is tight.
Summary of Contents for Through-the-Wall
Page 12: ...10 Overview and back view ...