Operation -
Guest Network
Guest Network -
From the Status Screen
1) Under NAVIGATE TO PAGE, select Local Network Settings
from the drop-down menu (Figure 21).
2) On the next screen, select ENABLE under Guest Network
Settings (Figure 22).
3) Give the guest network an easily recognizable name.
4) Enter a password - If you use a simple password, it is
recommended that the guest network be disabled when
not in use.
Select CONTINUE (Figure 22).
5) You will be directed back to Status page and can now close out
the screen (Figure 23).
Your guests are now ready to use the WiFi.
Figure 21
Figure 22
Figure 23
9
