background image

5

Forget and Saved Networks

If you want to forget the WiFi network that you are currently on click the 

FORGET WIFI

 button. 

Figure 10

To view the list of saved networks. Click the 

SAVED WIFI

 button. On this page 

you will be able to prioritize your list of saved networks, delete any or all 
saved networks, and edit any saved network. 

Figure 11

Most functions on the Winegard ConnecT are controlled from the Local 
Network Settings screen. From the Status Screen, select 

LOCAL NETWORK 

SETTINGS

 from the drop down menu and click 

SELECT

. From here (

Figure 12

), 

it is possible to do any of the following:

Change (SSID) Network Name

It is recommended that you change the name of your ConnecT. This will 
improve the security of your network and make it easier to find with your 
WiFi enabled devices.

Change Network Password

To secure your network, it is suggested that you change the network 
password to something you can remember. The new password must be at 
least eight characters long. You will need to log in using the new user name 
and password.

Security Type

The Winegard ConnecT Security Type has been defaulted to WPA2-PSK 
(AES). Other options are available on this screen.

Guest Network

The Winegard ConnecT provides a simple way to set up an extra network that 
doesn’t have access to the Status Screen. This allows you to provide guests 
with an easier password to use when accessing your network while still 
maintaining a secure system.
To set up a Guest Network: 

1) 

Click on 

ENABLE

Figure 13

2) 

Give the guest network an easily recognizable name. 

Figure 13

.

3) 

Enter a password. If you use a simple password, it is recommended  
that the guest network be disabled when not in use. 

Figure 13

OPERATING FEATURES

Figure 13

NOTE:

 Any changes made to your network settings may result in a 

temporary loss of all network connections .  You will need to reconnect 
all devices to the Winegard ConnecT with the changed network name and/
or password.

Figure 12

Figure 11

Figure 10

For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com) 

8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281

Summary of Contents for ConnecT 4G1xT Series













Reviews: