background image

6

Using Outside Receptacle

If your outside TV receptacle is wired for satellite, you’ll need 
to locate where that receptacle leads and connect that directly 
to your satellite receiver.
If the outside TV receptacle is wired for cable, the wiring will 
have to be modified for use with satellite. The coaxial cable 
cannot run through any other devices or switches before the 
satellite receiver.
Typically, if wired for cable, the wiring will either run through 
a Winegard power supply or video switch. The easiest way 
to fix this is to disconnect the cable from that device, use a 
barrel connector, and connect a new cable that runs directly 
to the receiver, bypassing the power supply or video switch.

Transporting & Maintenance

Before transporting the antenna, disconnect all coaxial cabling 
from antenna and power inserter. Unplug power adapter from 
outlet.
The Carryout G3 antenna is designed to be maintenance free. 
However, it is a good idea to periodically clean the dome with a 
soft cloth, water, and dish soap.

Optional Accessories

RK-4000 Roof Mount Kit

Permanently mount the Carryout 
G3 antenna to your RV roof. No 
need to buy another antenna to 
replace your portable.  

Not for permanent installation  
on semi-trucks

.

TR-1518 Tripod Mount

The tripod mount has adjustable 
height and leveling settings of 
14.5”– 22” and quickly disassembles 
for compact storage.

For more information or to purchase accessories 
contact your local RV dealer or winegard.com

Carryout G3 Portable TV Antenna     

6

     

FCC Guidelines

Changes or modifications not expressly approved 
 by Winegard could void your authority to operate 
 the equipment.

NOTE

 

This equipment has been tested and found to comply 
with the limits for a Class B digital device, pursuant to 

part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential 
installation. This equipment generates, uses and can radiate radio 
frequency energy and, if not installed and used in accordance 
with the instructions, may cause harmful interference to radio 
communications. 

Summary of Contents for GM-9000









Reviews: