background image

Initial Setup Process

The Winegard – Connected app

 must be downloaded first 

before using the product. 

WARNING:

 FOR FIRST TIME USERS – The initial setup requires an internet 

connection to pair the device with a newly created account. 

Do not 

connect directly to the local network (shown on the front of this manual) 

of your Togo Roadlink C2 Device. You will be instructed when to connect 

during the initial account setup process. 

1. From your mobile device or tablet, download the free Winegard – 

Connected app either in the iOS App Store or the Google Play Store. 

Once the download is complete, open the app.  
2. Turn the power switch to the Roadlink C2 to the ON position. This will 

either be a rocker (on/off) switch or a push button on the right side of 

the wall plate as seen in the previous Installation (Option A) section of 

this manual (pg. 4). 

NOTE:

 Not all RVs are wired the same way. Consult your RV 

manufacturer if either this switch or button cannot be found.

3. In order to use the Togo Roadlink C2 unit you must accept 

Winegard's Terms and Conditions. To view the full Privacy Policy and 

Terms of Use please select the link in the app or visit http:www.

winegard.com/about/privacy-policy.
4. After the Terms and Conditions are accepted, a screen with 

the message “No devices have been detected. Please choose 

a method to connect to a new device.” will appear. Once this 

message disappears, click on the Add Device QR Code button. 

NOTE:

 You may get a message asking to allow the Connected app 

access to your device’s camera. You will need to allow access in order 

to complete  

the setup.

5. After selecting the Add 

Device icon, a message 

will appear stating “You 

must be signed in order 

to use this feature. You 

will automatically be 

taken to the account 

page to sign in with 

Togo.” Click on the Sign 

in with Togo ID button. 

Review Togo’s Privacy 

Policy (you must agree 

to the terms of use). If 

you already have a Togo 

account simply sign in 

and skip to step 7. If not, 

click on the link to create 

one (see step 6). 

6

Winegard 

Connected App

Summary of Contents for Togo Roadlink C2













Reviews: