P a g e
|
39
b.
Once you tap the parameter section of the previous screen you will move to the
input screen.
On this screen you can tap on each section in white to change the values.
Numeric sections will bring up a number pad to input the longitude. After input
of the longitude data, the “NEXT” button is selected to back out of the number
pad screen to this screen.
Alpha values toggle when you tap on them.
When the correct Longitude, Hemisphere and Polarization are selected, press
the “DONE” button to continue the configuration.
c.
The SEARCH SETTINGS screen asks if you would like to make changes to the
default Search Window settings.
The default search window settings for MODEM are:
Window Width = 90 Deg
Window Height = 10 Deg
Elevation Spacing = .5 Deg
Azimuth Speed = .5 Deg per second
Due to the nature of this condensed course, do not make changes to the default
search window at this time.
Select “No” to continue the configuration.
Summary of Contents for WX980
Page 10: ...P a g e 10 3 Open lids on both sides as shown below ...
Page 19: ...P a g e 19 ...
Page 56: ...P a g e 56 ...
Page 81: ...P a g e 81 9 4 Wiring Diagram User Supplied Device ...
