P a g e
|
41
The default Auto Peak values are:
Interval =
60 minutes
SNR Threshold =
0.5 dB
Axis Movement =
AZ 0.3, 2.0, 0.5
EL 0.3, 1.2
Due to the condensed nature of this manual, do not make changes to the Auto
Peak values at this time.
Select “Ok” here to continue with the configuration.
The MODEM SETTINGS screen will allow one final review of the settings for this
iDirect modem search. Selecting “YES” here will write the configuration
selections to the configuration memory and return the system back to the Main
Screen.
The Find Satellite button will be available if the system is in the stowed position
and ready for deployment.
Selecting “NO” here will bring up a screen stating that Satellite configuration has
been cancelled.
The only option after selecting no is to press “OK” which will return the
controller to the INSTALLATION MENU on page 19.
Even though the configuration will not be written to persistent memory, the
selections made on the previous configuration will be retained making
configuration selection easier if one selects “NO” by mistake.
Summary of Contents for WX980
Page 10: ...P a g e 10 3 Open lids on both sides as shown below ...
Page 19: ...P a g e 19 ...
Page 56: ...P a g e 56 ...
Page 81: ...P a g e 81 9 4 Wiring Diagram User Supplied Device ...
