G
UIDE D
'
INSTALLATION ET D
’
UTILISATION
WINESP40DUPRO
Page 11
3.3.
Installation of the inside unit
Due to the diversity of wine cabinets and the type of locations, each installer must adapt to the
constraints of its installation.
-
Use insulated ducting
Ø125mm
-
Make sure to choose the perfect place to
have a length of the shortest ducting
possible (14m max / reduce 1 m by
number of elbow)
-
Radius elbow ≥ 175 mm
-
Do not reduce the duct section
-
The suction and blowing should in no way be
even partially obstructed
-
The blowing and suction should be
separated to avoid a resumption of the air
supply, even partially (for checking, the
suction temperature should be the same
as the room temperature when the unit
produces cold)
-
Provide openings on the bottom for
suction and blowing
-
Provide space for refrigeration and
electrical connections and the passage of
the condensate drain
Two decoration grids are supplied with the unit. These grids are adapted to the air flow
.
SUCTION
BLOWING
