10
Stop the control system from the engine as follows:
10.1
Set to OFF all circuit breakers in the power supply box E85.
10.2
Set to OFF the engine control system (ECS) and the remote control system (RCS).
11
Do a check of the rail unit as follows:
11.1
Open the covers.
11.2
Make sure that there is no condensation or corrosion.
11.3
If you find condensation or corrosion, do the steps that follow:
11.3.1
Clean the related part.
11.3.2
Find the cause and repair the fault.
11.4
If necessary, apply anti-corrosion oil to give protection.
11.5
Close the covers.
12
Do a check of the supply unit as follows:
12.1
Make sure that there is no condensation or corrosion.
12.2
If you find condensation or corrosion, do the steps that follow:
12.2.1
Clean the related part.
12.2.2
Find the cause and repair the fault.
12.3
If necessary, apply anti-corrosion oil to give protection.
13
If the engine must have preservation for a long period, speak to or send a message to
WinGD for the applicable preservation procedures.
CLOSE UP
•
None
X72-B
AA00-0000-00AAA-151B-A
Operation Manual
Prepare the engine for standstill or for maintenance
Winterthur Gas & Diesel Ltd.
- 357 -
Issue 003 2021-12
