10.1
Troubleshooting - general data
If the AMS shows trigger value signals, do a check of the data that follow:
•
Make sure that all shut-off valves to the instruments are open.
•
Make sure that all shut-off valves are in the correct operation position.
•
Make sure that the instruments are serviceable.
•
Make sure that the cables are connected correctly to the instruments.
•
Make sure that there are no leaks.
Before you look for other causes repair defects immediately. For the procedures to replace
defective components, refer to the Maintenance Manual.
The tables in section
10.2 Malfunctions of systems and components
show how to repair
malfunctions on the engine. The tables give the data that follow:
•
Title of the table
The title of the table gives the description of the malfunction.
•
Indication
This list specifies the number of the signal related to the value. The list can also contain text
or be empty.
•
Possible cause
This list gives possible causes that have activated the alarm, or have started the malfunction.
Refer to the specified sequence to find faults.
•
Procedure
This list gives data about the related malfunction. Refer to the specified sequence during
troubleshooting. For repair work refer to the related section of the Maintenance Manual. If
you cannot repair the malfunction, speak to or send a message to WinGD.
X72-B
AA00-0000-00AAA-410B-A
Operation Manual
Troubleshooting - general data
Winterthur Gas & Diesel Ltd.
- 386 -
Issue 003 2021-12
