5.6
Group 6 - Scavenge air components
5.6.1
Scavenge air receiver
The scavenge air receiver (005,
) supplies the cylinders with the applicable quantity of
air.
The scavenge air receiver is a welded assembly attached to the cylinder block on the exhaust
side.
The relief valve, installed on the scavenge air receiver, opens when the air pressure increases to
more than the permitted value in the air space (001,
).
For more data about the scavenge air system, refer to section
Fig 5-27
Scavenge air receiver (example)
001
002
003
004
005
Legend
001
Scavenge air from turbocharger
004
Auxiliary blower
002
Diffuser
005
Scavenge air receiver
003
Scavenge air cooler
The longitudinal wall (002,
) divides the scavenge air receiver into the receiver
space (003) and the air space (001). The flaps (005) are attached to the longitudinal wall (002).
The flaps (005) prevent the scavenge air to flow back into the air space (001).
X72-B
AA00-6420-00AAA-043A-A
Operation Manual
Scavenge air receiver
Winterthur Gas & Diesel Ltd.
- 198 -
Issue 003 2021-12
