11.1
Engine data
The standard data of the X72-B engine is given in
.
Tab 11-1
General data
Item
Value Unit
Cylinder bore
720 mm
Piston stroke
3086 mm
Speed range
66 to 89 rpm
Stroke / bore ratio
4.29 -
Available number of cylinders
5 to 8 -
Number of pulses for cylinder pre-lubrication
245 -
gives the data that follow:
•
Rating point
For the rating points refer to
•
Speed
This list gives the speed of the crankshaft in rpm.
•
Power
The power in kW for each cylinder refers to the ISO standard reference conditions:
○
Total barometric pressure is 1.0 bar
○
Suction air temperature is 25°C
○
Relative humidity is 30%
○
Cooling water temperature at the engine inlet is 25°C.
•
BSFC
This list gives the Brake Specific Fuel Consumption (BSFC) for fuel of lower heating value
42.7 MJ/kg (10 200 kcal/kg) and standard tuning.
•
Mean piston speed
This list gives the mean piston speed in m/s.
•
MEP
This list gives the Mean Effective Pressure (MEP) in the combustion chamber in bar.
•
Firing pressure
This list gives a guide value for the firing pressure in the combustion chamber in bar. The
firing pressure can be lower than the guide values in the table.
X72-B
AA00-0000-00AAA-030A-A
Operation Manual
Engine data
Winterthur Gas & Diesel Ltd.
- 482 -
Issue 003 2021-12
