Quick Start Guide
1. Download/Update the Wink App
Visit the iTunes App Store or Google Play Store to download
the latest version of the Wink app. The app will guide you
through some quick steps to sign up or log in.
2. Follow Setup in the Wink App
First, a Wink Hub is required, so be sure that it has already
been connected in the Wink app.
Next, navigate to the Products section and tap the “Add
to Wink” button. Find the Wink Door/Window Sensor and
then follow the instructions in the app to complete the
connection process.
Installation
The sensor and magnet can be installed by using either the
included double-stick tape or hardware. To expose the screw
holes, remove the cover and battery from the sensor. For
proper operation, there should be no more than a 1/2” gap
between the sensor and magnet.
Less than
1/2” apart
Align the two
center lines
Including/Connecting into the Z-Wave Network:
Follow the instructions for your Z-Wave certified Controller
to enter inclusion mode.
When prompted by the Controller:
1. For proper inclusion, bring the Door/Window Sensor
within range of your Controller.
2. Pull the battery tab on the backside of the sensor to
power on,
or remove then re-install the batteries.
The LED light should blink.
Door/Window Sensor
