Notice:
If no separable cable transition (e.g. T-HT KÜ M1188) or
no Winkhaus cable transition is used, then the cable "T-HT
CONNECTION CABLE 6 M FOR MOTOR" for motor housing
(2522881) must be used.
blueMatic EAV
5044744
31
Installation, Operating and
Maintenance Instructions
2
EN
Aug. Winkhaus GmbH & Co. KG
∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
Cable transition frame part for T-KÜ-T1
Cable transition frame part for external power supply
Cable transition frame part for frame power supply
Frame part with 4 m cable and cable end sleeves
(6 wires)
T-KÜ-T1 RT KABEL 4M
5040503
Frame part with 0.6 m cable and plug for frame
power supply inclusive cover strip STV-KÜ-T1
RT R8, to cover the profile hole on the frame
side
T-KÜ-T1 RT KABEL 0,6M RNT
5040504
Part Description (see also Figure 3.2)
Art.-No.
T-ABDECKBLECH KÜ-T1 FT F24 KANT MC
5018556
Cover plate for sash, flat faceplate 24 mm, square, length 134 mm,
suitable for ALU (PVCu if necessary)
T-ABDECKBLECH KÜ-T1 RT F24 X 350 MC
5028782
Cover plate for frame, flat faceplate 24 mm, angulate, square, length 350 mm,
suitable for ALU (with fitting groove 24 mm), suitable for example for heroal
D92 UD
