DANGER!
The installation of electrical equipment requires
expertise, thus such work should only be carried out by an
electrician.
Generally assemble and install always only with the power off!
DANGER! IMPORTANT ADVICE!
In order to prevent blockage of the lock, no key or key ring may
be inserted in the locking cylinder!
Caution!
First the door has to close easily, then you can test
electrical performance!
If you connect an intercom system take care that the button of
this system is designed as a potential free contact!
External voltage must not be transmitted from the intercom
system to the lock!
5044744
42
3
EN
Aug. Winkhaus GmbH & Co. KG
∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
blueMatic EAV
Installation, Operating and
Maintenance Instructions
3.3 Installations
By impressing the working voltage (start of operation), the motor brings the
locking points into the neutral position.