9
EN
Aug. Winkhaus GmbH & Co. KG
∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
blueMotion
5044745
96
Installation, Operating and
Maintenance Instructions
Aug. Winkhaus GmbH & Co. KG
∙ Berkeser Straße 6 ∙ 98617 Meiningen ∙ T +49 369 3950 - 0 ∙ tuerverriegelung@winkhaus.de ∙ www.winkhaus.de
STV SB February 2017 · EN · All rights reserved.
Declaration of performance No. 001.3 CPR
1. Unique identification code of the product type:
panicLock 179, Emergency exit locks to DIN EN 179
2. Type, batch or serial number of a different identifier for identification of the construction product accor ding to Article 11,
paragraph 4 of the Construction Products Regulation (CPR):
Emergency exit locks STV-AP179, STV-AP179-AV3 OR, STV-BM-EN179
3. Purpose of use intended by the manufacturer or intended purpose of use of the construction product in accordance with
the applicable harmonised technical specification:
For doors in escape routes with fittings according to DIN EN 179
4. Name, registered trade name or trademark and contact information of the manufacturer in ac cordance with Article 11,
paragraph 5 of the Construction Products Regulation (CPR):
Aug. Winkhaus GmbH & Co. KG
Berkeser Str. 6
D-98617 Meiningen
5. Name and contact information of the authorised person, if applicable, who is commissioned with the tasks in accordance
with Article 12, paragraph 2 (CPR):
N/A
6. Systems or systems for the evaluation and inspection of the performance reliability of the construction product in
accordance with Annex V of the Construction Products Regulation (CPR):
System 1
7. The MPA NRW with the identification number 0432-MPA-NRW of the notified body has carried out the type inspection in
accordance with the specifications of EN 179: 2008-04 and evaluated and verified the performance reliability according to
System 1, as well as issued the test report.
Certificate 0432 – CPR – 00107-01
8. Declared performance:
Significant features
Performance
Harmonised techni cal specification
Capability for passage
fulfilled
DIN EN 179: 2008-04
(EN 179: 2008 (D))
Permanent functionality of the release capability
Class 7
Capability of independent closing (of fire/smoke
protection doors in escape routes)
fulfilled
Permanent functionality in regard to the ca pability of
automatically closing C as well as in regard to ageing and
diminished quality
Class 7
Fire resistance capability E (Room closure) and heat
insulation I
Class B
Control of harmful substances
No harmful substances may be con tained
within or released by this pro duct.
9. The product described under sections 1 and 2 fulfils the performances listed under section 8.
This declaration of perfor mance is ussed under the sole resposability of the manufacturer identified in point 4.
Signed for and on behalf of the manufacturer by:
Meiningen, 17/02/2017
ppa. Dr. D. Warnow, Technical Director
ppa. A. Dinkelborg, Director of Product Management
