Winmate E430 Series PDA
User Guide
10
Check the Sealing
2.3.3Battery Charging
Please charge the battery before using the PDA for the first time, charge the
battery until the LED indicator turns solid green. To charge the E430, use a cable
or a docking with appropriate power supply. For more information about the
E430 accessories, see
chapter 5
.
To charge the battery using USB/ Charge cable:
1.
Connect the power supply output connector to the input power port on the
USB/Charge cable.
2.
Remove the protective rubber and connect the USB/ Charge cable to the
bottom of E430. The battery charge LED indicates the battery charging status
LED Status
Indication
OFF
E430 is not charging
E430 is not properly connected to a power source
Solid Red
E430 is in charging process
Solid Green
Charging complete
This product uses a non-removable battery. The battery should
only be removed when you want to change the SD Card or SIM
Card.
To charge the battery using Docking:
1.
Connect the docking to power, Insert the E430 into the slot to begin
charging.