25
Winmate E430RM4L Rugged PDA User Guide
1.6.3 Charging the Battery
Please charge the battery before using the PDA for the first time, charge the battery until the LED indicator
turns solid green. To charge the E430RM4L, use a cable or a docking with appropriate power supply. For
more information about the E430RM4L accessories, refer to
LED Status
Indicator
OFF
The PDA is not charging or not properly connected.
Solid Red
Battery charged 0~89%.
Solid Green
Battery charged 90~100%.
1.6.3.1 Charging the battery using USB Cable
1.
Connect the power supply output connector to the
input power port on the DC Jack cable.
2.
Remove the protective rubber and connect the DC
Jack cable to the side of E430RM4L. The battery
charge LED indicates the battery charging status.
1.6.3.2 Charging the battery using Charging Dock
This docking provides input: 12V/36W DC in
1.
Connect the battery charger dock to power, insert the
battery into the slot to begin charging.
2.
The E430RM4L LED indicator indicates the status of
the battery charging.
Red: 0~89%.
Green: 90~100%.