17
Chapter 4: Operating the Device
Chapter 4: Operating the Device
4.1 Using Recovery Wizard to Restore Computer
Note:
Before starting the recovery process, make sure to backup all user data. The data will
be lost after the recovery process.
To enable quick one-key recovery procedure:
1. Connect the computer to the power source. Make sure the computer stays plugged in to power source
during the recovery process.
2. Turn on the computer, and when the boot screen shows up, press
Tab+ F6
to initiate the Recovery
Wizard.
3. The following screen shows the Recovery Wizard. Click
Recovery
button to continue.
4. A warning message about data loss will show up. Make sure the data is backed up before recovery,
and click
Yes
to continue.
5. Wait the recovery process to complete. During the recovery process, a command prompt will show up
to indicate the percent of recovery process complete. The system will restart automatically after
recovery completed.
Important:
Before starting the recovery process, remove the PCI/ PCIe card and CFast card.
