G-WIN AMD Rugged Series Panel PC User Guide
5
2-1-2 10.4-Inch Input / Output Devices
The following figure shows the I/O arrangement of the 10.4” G-WIN
Rugged Panel PC. The backside of the chassis contains most of the
connectors.
1
Audio
Line in, Line out and Micro in.
2
COM1
9-pin male Serial Port connector that can attach a serial
mouse or other serial devices directly to the port.
3
DC Terminal
Block (Optional)
Pluggable 3pin terminal block power input, normally
comes with use wide power range module inside.
4
COM2(Optional)
9-pin male Serial Port connector that can attach a serial
mouse or other serial devices directly to the port.
5
DC Lockable
Input (Default)
Connect the power cord to the AC outlet, and connect the
power to the monitor through the AC/DC adapter.
6
PS/2
PS/2 Connector plus Y cable to connect Keyboard and
Mouse.
7
VGA
Use VGA port to connect an external Display.
8
USB 1, 2
USB-compatible devices can be plugged directly into the
USB 2.0 port.
9
LAN1
10/100 Mbps (Optional Giga LAN), connect a network
cable to the standard RJ-45 port and get connection to
the Local Area Network (LAN).
10
LAN2
10/100 Mbps (Optional Giga LAN), connect a network
cable to the standard RJ-45 port and get connection to
the Local Area Network (LAN).
