background image

 

 

11.6" Rugged Tablet M116P User Guide 

1.4 Declaration of Conformity (DoC) 

FCC Statement 

This device complies with part 15 FCC rules.  

 

Operation is subject to the following two conditions: 

 

This device may not cause harmful interference. 

 

This device must accept any interference received including interference that 
may cause undesired operation 

This equipment has been tested and found to comply with the limits for a class "B" digital device, 
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection 
against harmful interference when the equipment is operated in a commercial environment. This 
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in 
accordance with the instruction manual, may cause harmful interference to radio communications. 
Operation of this equipment in a residential area is likely to cause harmful interference in which case 
the user will be required to correct the interference at him own expense. 

CE Notice (European Union) 

 

 

Electromagnetic Compatibility Directive (2014/30/EU)  

  EN55024: 2010/ A1: 2015 

o

  IEC61000-4-2: 2009  

o

  IEC61000-4-3: 2006+A1: 2007+A2: 2010 

o

  IEC61000-4-4: 2012  

o

  IEC61000-4-5: 2014  

o

  IEC61000-4-6: 2014 

o

  IEC61000-4-8: 2010 

o

  IEC61000-4-11: 2004 

  EN55032: 2015/AC:2016 

  EN61000-3-2:2014 

  EN61000-3-3:2013 

Low Voltage Directive (2014/35/EU)  

  EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:2013 

 
This equipment is in conformity with the requirement of the following EU legislations and harmonized 
standards. Product also complies with the Council directions. 

 
 
 

Summary of Contents for M116P Series

































































Reviews: