Winmate M700DT4 Tablet PC
User Guide
9
Battery charging
M700DT4 can operate either on the external AC power adapter or internal battery power.
It is suggested that user use AC Power when charge the Tablet PC for the first time.
Please charge the battery before using the Tablet PC for the first time, charge the battery
until the LED indicator turns solid green. To charge the M700DT4, use a cable or a
docking with appropriate power supply.
To charge the battery using 5V DC in:
1. Remove the protective rubbed bumper on the side of the device
2. Locate the DC Jack
3. Connect the power supply output connector to the input power port on the Device
4. The battery charge LED indicates the battery charging status
LED Status
Indication
OFF
M700DT4 is not charging or not properly connected
Solid Red
Low battery 20%~11%
Flash Red
Low battery 10%~5%
Solid Orange
Charging
Solid Green
Charging is completed
Use only the AC adapter included with M700DT4. Using other AC
adapters may damage the Tablet PC
Turning On and Off the Device
Turning the M700DT4 On
1. Place the device on a flat and stable surface or hold it
2. Make sure the device is either connected to AC power or to the battery pack
with power
3. Press and hold the power button for 3 seconds, located on the top part of the
unit