Network Player Series MSS500/550 User Manual V1.8
Page 17
3.1 Connecting Cable
Network Player BOX
Check Boot Screen
1. Choose the video output (DVI/S-video/Composite) you would like to use
and connect the cable. Connect another end of the cable to your monitor.
2. Connect audio cable (optional).
3. Configure network (optional)
a. Connect Ethernet cable to Network Player Plus LAN port
b. Connect another end of Ethernet cable to a hub
c. Connect Ethernet cable to your computer with MSO installed
d. Connect another end of Ethernet cable to the hub
4. Connect RS232 cable (optional).
5. Plug the DC end of the power adapter into the power connector of the
Network Player Plus unit; then, plug the AC end to an electrical outlet.
The Network Player Plus is powered up immediately.
6. You can check the firmware version, client LAN IP, system mode (active
mode), and server IP in the beginning of system boot-up.