26
Arm-based Open Frame HMI User Manual
3.3.1 Panel Mount
Open Frame HMI device comes with clamp mounts that enable you to install the unit onto a wall
(where space has been cut out to accommodate the rest of the hardware).
Installation Instruction
1. Make a cutout on the fixture (ex. wall) according to the cutout dimensions of the display.
2. Based on the drawing, mark screw holes on a front side of the fixture. Place display on the
fixture from the rear side.
3. Use electric screwdriver to fasten M3 screws from the front side.
4. You complete the installation. Please connect all the peripherals if needed.
❶
❷
❸
❹