7
Preface
*
Let service personnel to check the equipment in case any of the following
problems appear:
o
The power cord or plug is damaged.
o
Liquid has penetrated into the equipment.
o
The equipment has been exposed to moisture.
o
The equipment does not work well or you cannot get it to work according to
the user manual.
o
The equipment has been dropped and damaged.
o
The equipment has obvious signs of breakage.
•
Do not leave this equipment in an uncontrolled environment where the storage
temperature is below -20°C (-4°F) or above 60°C (140°F). It may damage the
equipment.
Caution/Attention
Use the recommended mounting apparatus to avoid risk of injury.
Utiliser l’appareil de fixation recommandé pour éliminer le risque de
blessure.
Warning!/ Avertissement!
Only use the connection cords that come with the product. When in doubt,
please contact the manufacturer.
Utiliser seulement les cordons d’alimentation fournis avec le produit. Si
vous doutez de leur provenance, contactez le manufacturier.
Warning!/ Avertissement!
Always ground yourself against electrostatic damage to the device.
Toujours vérifier votre mise à la terre afin que l’équipement ne se décharge
pas sur vous.
•
Cover workstations with approved anti-static material. Use a wrist strap connected
to a work surface and properly grounded tools and equipment.
•
Use anti-static mats, heel straps, or air ionizer for added protection.
•
Avoid contact with pins, leads, or circuitry.
•
Turn off power and input signals before inserting and removing connectors or test
equipment.
•
Keep the work area free of non-conductive materials, such as ordinary plastic
assembly aids and Styrofoam.
•
Use filed service tools, such as cutters, screwdrivers, and vacuum cleaners that
are conductive.
•
Always put drivers and PCB’s component side on anti-static foam.
