32
8.4/ 10.4" Ultra-Rugged Tablet User Guide
Problem
Solution
The GPS application cannot find my
location.
•
Make sure that GPS is powered on in
Win-set.
•
Make sure that GPS receiver and the
location sensor are enabled in Control
Panel.
•
The tablet computer may be out of
coverage area. Move your tablet computer
outdoors or closer to a window.
•
Check if your surroundings have
interferences, such as microwave ovens,
cordless phones. Move the tablet computer
away from objects causing interference.
No sound is produced.
•
Adjust volume of the tablet computer by
pressing on the volume rocker.
•
If using an external audio device, make
sure that the cable is properly connected.
I cannot project the tablet computer
display to another monitor.
•
Make sure the VGA driver is installed.
•
Make sure the output setting selected is
correct.
Barcode scanner does not emit laser
beam and does not seem to work.
•
Make sure the Barcode scanner device is
enabled in Win-set utility.
•
Make sure under Windows, the Barcode
Reader is set to COM 15 port, so that
Win-set can trigger the Barcode Reader
hardware.
Barcode Scanner emits laser beam but
does not read barcode presented to it.
•
Adjust the distance between barcode
scanner of the device and the barcode
being scanned.
•
Make sure the barcode code type is
enabled in the tablet. To enable/disable a
specific barcode code type, go through the
“Barcode Scanner Configuration” section.
I am having GPS accuracy issue
•
When utilizing the GPS function, we
recommend disabling the Barcode Reader
in Win-set to reduce interference.