R10IH8M-RTT2GP User Guide
12
First-time Operation
To start using the R10IH8M-RTT2GP for the first time:
Install the Battery Pack
Installing Hot-swappable Battery
Charge the R10IH8M-RTT2GP
Power on the R10IH8M-RTT2GP
Configure the R10IH8M-RTT2GP
Inserting Battery Pack
To insert the standard battery pack into the Tablet Computer:
1. Disconnect AC adapter and power cord from the Tablet Computer.
2. Turn the Tablet Computer over, back facing up.
3. Insert the battery on the connector-pins side first, and then lower the battery into the
battery compartment. Screw tightly on the battery to make it fully inserted.
4. Make sure the battery is completely inserted, battery will be flat against the housing once
fully inserted.
Place the tablet (back facing up) and insert the Battery into the battery slot.
Removing the Battery Pack
1. Power off the Tablet Computer (or turn on sleep mode). Disconnect any cords connected
to the computer.
2. Turn the Tablet Computer over, back facing up.
3. Locate the Battery and unscrew it to the
“Unlocked” position.
4. Lift the battery out.
Summary of Contents for R10IH8M-RTT2GP
Page 7: ......
