12
10.1~15.6" PoE Touch Monitor User Manual
1.5 External Connectors
Terminal interfaces are located on the bottom side of the display.
Item
Description
PoE
– Connects a monitor to PoE for power transmission in network
equipment, via network UTP cable, together with data.
PoE follows standard IEEE 802.3at (25 Watt).
USB for Touch
- For touch interface.
Example: Touch interface to PoE monitor.
VGA (RGB)
–Transmits video from a PC to a monitor.
Example: An external HMI device to PoE monitor.
HMDI
–. Transmits uncompressed video data and compressed or
uncompressed digital audio data from a display.
Example: An external HMI device to PoE monitor
1.6 Physical Buttons and LED Indicators
Physical buttons and LED indicators (OSD Control Panel) located on the rear side of the Display.
Type A (For 10.1
”, 10.4”, 12.1”, 15”)
OSD Panel
Physical Buttons
DOWN-
Press to lower down the volume.
UP-
Press to increase the volume.
ESC/ AUTO-
Press to exit the menu.
OK/ MENU-
Press to confirm the action or to call main OSD menu.
Power On/ Off
- Press to power on or power off the device.
