16
7~23.8" P-Cap Open Frame Panel PC Quick Start Guide
Example:
Every 10 min watchdog will monitor the
system, in case any error occurs the system
will restart automatically when the countdown
time reaches 0.
Every 9 min watchdog timer will be reset to
10 min.
Settings
Description
Watchdog Countdown Time
The system automaticity restarts when this countdown
time reaches zero
. Default: 10 min
Periodically Feed Time
To set a cycle time to automatically reset watchdog timer.
Default: 9 min
Enable / Disable
Enable or disable watchdog.
Default: Enable
4.3 Using Recovery Wizard to Restore Computer
NOTE:
Before starting the recovery process, make sure to backup all user data. The
data will be lost after the recovery process.
To enable quick one-key recovery procedure:
1. Connect the computer to the power source. Make sure the computer stays plugged in to
power source during the recovery process.
2. Turn on the computer, and when the boot screen shows up, press
Tab+ F6
to initiate the
Recovery Wizard.
3. The following screen shows the Recovery Wizard. Click
Recovery
button to continue.
4. A warning message about data loss will show up. Make sure the data is backed up before
recovery, and click
Yes
to continue.
Wait the recovery process to complete. During the recovery process, a command prompt will show
up to indicate the percent of recovery process complete. The system will restart automatically after
recovery complete.
